2027 KTM FREERIDE E
£8,999
Model Description
PURE ELECTRIC FREEDOM
The all new KTM FREERIDE E brings a fresh surge of energy to electric offroad riding. Lightweight, agile, and near silent, it unlocks new possibilities on trails where traditional bikes can’t go. Its powerful new drivetrain delivers instant torque, 19.2 kW peak power, and three adaptable ride modes, while the upgraded 5.5 kWh interchangeable battery offers up to three hours of riding freedom. A newly developed chassis, WP XACT/XPLOR suspension, and road legal capability make it equally ready for remote paths or everyday play.
Ride Modes:
The KTM FREERIDE E has three ride modes that suit specific scenarios or performance parameters. Each setting changes the torque and power delivery. Three recuperation settings can be engaged to assist with maximum engine efficiency and battery life: OFF, MID, and HIGH. These can be selected against a specific mode to ensure flexibility with the power package of the KTM FREERIDE E. The ergonomic four-button switch cube on the left handlebar can easily activate the ride modes and other options.
Drivetrain:
Boasting 8,3 kW of nominal output, 19,2 kW peak power, more than 37 Nm of torque and top speed of 95 km/h the engine is resolute water and dustproof unit that is fully integrated into the overall character and agility of the motorcycle.
Display:
The KTM FREERIDE E uses the same LCD dashboard as the KTM EXC enduro range. The resistant display shows a single value at a time to ensure the rider remains fully focused on the route ahead. Thanks to quick contact with two buttons, the options can be cycled. The options are the state of charge, the selected ride mode, and a regenerative map with odometer, clock, trip time, and accumulated run time.
Brakes:
BRAKTEC systems deliver fantastic results with a 260 mm front disc and 220 mm on the rear. Mounting of both front and rear brakes on the NEKEN handlebars is one of the key differences from other motorcycles in the KTM portfolio. The ability to operate both forms of stopping power with two hands allows the user to concentrate more on body stance and foot position.
Frame:
KTM prioritized light feeling and handling, as well as agility, of the KTM FREERIDE E and developed a chassis with the drivetrain and battery at the load-bearing core for a low center of gravity experience. By hinging the chrome-molybdenum steel frame on the engine and battery architecture, the chassis can remain featherweight and slim. The KTM FREERIDE E’s seat height is 910 mm.
Suspension:
Thanks to 43 mm WP XACT split design forks, the front end is reactive but also glued and planted when needed. Adjustment is easily made with the single air pressure valve, supplied air pump for preload, and clickers for compression and rebound. The fully adjustable WP XPLOR PDS system provides 250 mm of travel on the rear end.
Safety:
In the case of a tip-over, the KTM FREERIDE E is equipped with a ‘roll-over’ sensor that cuts the power when tipped over.
Battery:
The 29kg MX50 Lithium-Ion battery has been tested and proven in the most extreme conditions and constructed in a way that means it is interchangeable. Removal from the motorcycle can be performed easily and in less than 10 minutes. The battery is IP67-rated, and its capacity is 5,5 kWh. Nominal voltage registers around the 50 V mark, and the battery life can withstand more than 1000 charge cycles before dipping to 80% SoH. Typical Enduro riding time is estimated to be between 2 and 3 hours.
Charger:
The KTM FREERIDE E comes with a 660 W charger and will complete a full charge in 8 hours with a normal household supply. 20-80% rate can be achieved between 4-5 hours.
Premium Manufacturer’s Warranty:
This motorcycle comes with a Premium Manufacturer’s Warranty. Riders enjoy up to 2 year of coverage and experience the thrill of offroad riding with added peace of mind. To keep the warranty valid, always follow the guidelines outlined in your motorcycle’s Owner’s Manual, including using the bike as intended and completing all scheduled services at an authorized KTM dealer. The standard manufacturer’s warranty conditions, as specified in the delivery certificate, also remain applicable. More information and details on how to benefit from this offer can be found on the KTM warranty page. Valid from Model Year 2027 onwards for all offroad motorcycles as well as the 450 SMR.
Finance Calculator
Model Specification
-
Suspension
Rear Suspension
WP XPLOR shock absorber with PDS
Suspension Travel Front
250 mm
Suspension Travel Rear
240 mm
Front Suspension
WP XACT USD Fork
Fork Offset
20 mm
-
Dimensions
Ground Clearance
360 mm
Seat Height
910 mm
Weight Without Fuel
112 kg
Wheels
1.60 x 21"; 2.15 x 18"
-
Engine
Torque
37.6 Nm
Transmission
Single speed transmission
Charger Line Voltage
90 - 265 V / 50 - 60 Hz
Charging Power
660 W
Charging Time100
480 min.
Charging Time80
360 min.
Electric Motor
50,4 V - PMSM
Max Power
19,2 kW
Rated Output
8,3 kW
Traction Battery
MX50 Lithium-Ion Battery
Max Motor Speed
12000 rpm
Battery Capacity
110 Ah
Secondary Gear Ratio
13:50
-
Frame
Rear Brake
Disc brake
Rear Subframe Design
Aluminium / Polyamide Glass Fiber
Steering Head Angle
65.6 °
Wheelbase
Fehlende Variable
Front Brake Disc Diameter
260 mm
Rear Brake Disc Diameter
220 mm
Front Brake
Disc brake
Frame Design
Chrome-molybdenum steel frame
Chain
520, Non-sealed
Handlebar
Pro Taper, Aluminium Ø 28/22 mm
Tyre Height Front
90
Tyre Height Rear
90
Tyre Width Front
90
Tyre Width Rear
120
Tyre Dimensions Front Rear
90/90; 120/90

5 based on votes
KTM
2027 KTM FREERIDE E
£
8999
Available in Stock